Wallbox PC-series (Automática 6A a 32A) 22Kw 32A

Wallbox PC-series (Automática 6A a 32A) 22Kw 32A
1,180.80€ -20%
Brand:
Product Code: 97908-97924
Availability: 2-3 weeks
Viewed 3824 times

Available Options

Product Description

Wallbox PC-series 22Kw

Type2 socket or 6mts cable + type2 plug +RFID-MID

WITH INTELLIGENT LOAD MANAGEMENT


Up to 22kW of charge power (charge 10x faster)

Easily configurable charging power: 2.3 - 22kW

Integrated DC fault current sensor

RFID access protection (can be activated)

Built-in energy meter with LED display

Communication over a LAN connection

Load management slave: can be integrated with load management

Suitable for all electric cars


Product dimensions (W x H x D) ....... 240 x 495 x 163 mm

Weight ... 4.8 kg

Installation variations ............... Wall mounting or pole installation (stainless steel)

Rated current ........... Configurable values: 10A, 13A, 16A, 20A 25A 0u 32A

Charging power ......... 2.3kW, 22kW

Voltage ... 3 X 230V / 400V

Communication ........ in acc. with IEC 61851-1, mode 3

Type of plug ........ Type 2 (according to ICE 62196-2)

Standards and guidelines ............. Directives: 2004/108 / EC, 2006/95 / EC, 1999/5 / EC R & TTE, 2011/65 / EU | European standards: EN 61851-1, EN 61851-22, EN 62196-1, EN 62196-2, EN 61439-1, E DIN EN 61439-7, EN 61000-6-1, EN 61000-6-3, EN 50581: 2012 (RoHS-RL) RFID: EN 301 489-1, EN 301 489-3, EN

Degree of protection .......... IP54 waterproof, suitable for outdoor use

Storage and operating temperature (without direct sunlight), relative humidity permissible at 16 A: -25 to + 50, max. 95%

at 32 A: -25 to + 40, max. 95%

DC fault current detection ......... yes


Faster loading

With the KEBA KeContact P30 B Series recharging station, you can charge up to 10 times faster than in a standard household outlet. Check out our summary of charging time to see how fast your car's electric battery can be fully recharged, and how quickly you can get back on the road.

High quality wallbox, easy to use

Whether indoors or outdoors, electrical parts enjoy reliable protection through high-quality materials such as weather-resistant and heavy-duty plastics. The KEBA KeContact P30 C Series recharging station is easy to operate and always indicates the current operational status through multicolored LEDs

Configurable charging power

To prevent overloading of the system and blown fuses, the charging power of the charging station must correspond to the upstream protection and fuse installation. In contrast to other manufacturers, the KEBA charging station allows easy adjustment of charging power via dip switches, ranging from 2.3 to 22 kW.

Continue to charge after a crash

The automatic recovery function automatically restarts the charging process in case of failure. This means that you can charge your electric car reliably even after a power failure, thermal overload or residual current cut, so you can face your next journey with a full battery and no need for intermediate charging.

Integrated fault current sensor

The KEPA KeContact P30 series B charging station comes with a DC fault current sensor as standard. All you need to do at the installation is to install a low cost Type A RCD on the upstream protection device.

RFID-controlled closing

Your charging station can only be used by users whose RFID card details are saved to the charging station. If an OCPP backend is used, new RFID cards can be programmed in the backend. Without a backend installation, RFID cards can be activated directly at the charging station with the help of the supplied master card. Electric car drivers use an RFID charging card to unlock the charging station and start the charging process. The station is delivered with RFID disabled.

Compatible with many power management systems

KEBA c-series recharging stations can be integrated into a broad range of intelligent and controlled home and power management systems via the Ethernet interface, which differentiates KEBA from the competition. The following brands are compatible with KEBA: Cohere, Loxone, Mygekko, smartfox, Solarlog.

Easy to implement load management

Combined with a KEBA KeContact P30 x-series charging station, you can integrate the c-series into a static load management system. This system involves a KEBA P30 x-series (master) controlling up to 15 C-series loading stations (slaves). In addition, the P30 series is compatible with dynamic load management solutions such as Cohere Maxem.

Write a review

Note: HTML is not translated!
    Bad           Good
-15%
-20%
-20%

CEE32 Outlet Kit + Safety Kit 32A

246.00€    307.50€  
-5%